Ludhiana Steel Rolling Mills (LSRM)
Manufacturer and supplier of Carbon & Alloy Steel in different Grades, Sections & Shapes
LSRM the Group’s flagship unit was established in 1937 situated at Ludhiana. A new 14” Rolling Mill with four 3-Hi and one 2-Hi stands was set up in 1989 at a new location in the outskirt industrial area of Ludhiana, Another rolling mill of 20” with four 3-Hi and one 2-Hi stands was added in 1991. As the old unit became unviable and being situated in the heart of city, was closed in the year 1994. Under the enthusiastic leadership of Mr. Sanjay Jain, company has achieved a growth rate of more than 15% for the last five years.
He is being assisted by qualified Engineers, experienced technical and commercial personnel. The unit is accredited to ISO 9001:2008 QMS and received accreditation for ISO 14001 (Environment Management). We at LSRM are working in compliance with 5-S TQM. We at LSR are going to put our best efforts in making the environment pollution free, clean and green. We had been selected as one of the model units in India by UNDP/GEF, Ministry of Steel, India, for the modernization of plant.
Under the modernization plan of plant, new re-heating furnace was installed with fully automatic and controlled burners with PLC System. An 18” Roughing Mill with 2 Stands was installed. All the five stands of existing 14” Rolling Mill were replaced with new roller bearing stands with mechanised transfer tables, which would further improve the quality of finished products. This helped increase the productivity from 8 MT per hour to 15 MT per hour.
The ingots are rolled in different sections and shapes of round, square, hexagonal and flat in various grades under the expert supervision at each level by process control and quality inspection.
|Rolled Shapes||Rolling Section/Size||Steel Category||Grades|
|Rounds||8mm to 205mm||Stainless Steel||SS410, SS420, SS431, 20Cr13|
|Hot Die Stee||H-11, H-13|
|RCS||40mm to 140mm||Alloy Steel||EN24, EN353, EN354 EN19, EN31, EN36, EN36C, EN36B, SAE8620, SAE8622, 20MNCR5, 16MNCR5, 17CRNIMO6, EN47, SAE52100, SCM415, SCM420H, EN45A, EN41B, SAE8622, SAE86B45, EN18|
|BHEL Grade||AA-10681, AA-10683|
|Hex||32mm to 88mm||Low Carbon||SAE1008, C20, CL-II, ST50-2, ST50-3, ST52-3, S48C, SAE1040, SAE1046CR, SAE15B41|
|Plain Carbon||EN8D, EN9, EN42, C30, C40, C45, C55, 080M40, EN15|
|Any specified grades / Chemistry and jominey required by the customer.|